Head Office UK
Unit 2 Rodney House, Scotts Park, James Street, Westhoughton, Bolton, BL5 3QR
T. +44 (0)1942 817 489 I I E. [email protected]
Dock levellers bridge the gap between the height of the dock and the deck of an incoming vehicle. The equipment is versatile and robust allowing rapid loading and unloading. Recommended for production areas that need to receive or distribute goods. The leveller is operated hydraulically and can facilitate a maximum working range of 300mm in both directions (12.5% max gradient). This allows the equipment to be compatible with a much wider range of vehicle thus increasing flexibility and efficiency. Loading capacity is 6000Kg single axle loading and 9000Kg total dynamic load.
Products > Loading Bays
Platform width: up to 2000mm
Platform length: up to 2500mm
Lip length: up to 450mm
Leveller depth: 600mm
Pit depth: 600mm
A Retractable dock shelter is an extendable PVC awning system which encloses incoming vehicles when docking at a loading bay. The shelter creates a thermal seal around the back of the vehicle and the building, this significantly reduces internal heat loss whilst protecting any exposed areas to adverse weather conditions. The system improves the environmental performance of the loading bay building, whilst reducing energy requirements and improving safety for personnel and goods.
The protective curtains are constructed from 3mm thick PVC, reinforced with a double crossed nylon weave. The curtain elements are available in a range of colours. The main structure and frame are manufactured in galvanised steel.
The shelter will retract upon incorrect alignment preventing the chances of damage to the dock or the vehicle.
Width: up to 3400mm
Height: up to 3450mm
Projection: 600mm / 900mm
Top curtain: 1000mm / 1200mm / 1500mm
A dock seal is a compressible projection which projects around the perimeter of a loading bay. It is comprised of three foam pads along the two sides and top of the loading bay access point. The pads protect the vehicle and building during the docking procedure in addition to providing a seal which reduces heat loss and exposure to adverse weather conditions. The foam elements are constructed from one piece of PVC coated nylon fabric. Lightweight polyether foam with a good recovery rate is used for the core of the pad seals. A single piece of hard-wearing 1500g/m2 neoprene coated nylon is stitched to the front face of the cover and extends 50mm down each side - this forms the main wear area of the seal.
Standard opening size 2250mm x 2750mm.
Standard seal profile 300mm x 300mm
(with a height to suit building / vehicle parameters.)
An inflatable dock seal is a series of inflated bags around a loading bay entrance. The system is activated and moulds around the back of the incoming vehicle to form a tight seal. This significantly reduces heat loss from the loading bay building whilst protecting the vehicle and building from potential impacts. The system is very flexible and can accommodate a range of vehicle sizes.
An inflatable Unit consists of one header and two vertical side airbags mounted to a galvanised steel framework. Air bags are inflated by a high volume, low pressure motor / blower system. When activated the motor assembly forces air through the header and side air bags to quickly inflate and conform to the profile of the vehicle to form a seal. When the unit is deactivated the air bags quickly retract to the stored position. Any condensation inside the air bags is automatically exhausted each time the unit is activated. The air bags are made using a double stitched high strength vinyl material which is durable and highly flexible, even in extreme cold conditions. Fabric is breathable, therefore pressure does not build up.
Loading Bay Range
Fortress supply and fit a range of loading bay products. for more information about options please see below or contact us directly.
Outer dimensions: 3500mm wide x 3600mm high
1220mm header air bag
Two vertical air bags: 610mm wide when inflated
FDL Hydraulic Dock Leveller
FRDS Retractable Dock Shelter
FDS Dock Seal
FIDS3500 Inflatable Dock Seal
Fortress SEFA LLP. Unit 2 Rodney House, Scotts Park James Street, Westhoughton, Manchester
Registration number : NC941